-
Global Layout
Contact Us
GCL Website Matrix
High-reliability and high-efficiency module
410W
Power output
High-reliability and high-efficiency module
415W
Power output
High-reliability and high-efficiency module
550W
Power output
High-reliability and high-efficiency module
555W
Power output
MBB Half-Cut Technology, low operating temperature & high output
Selected encapsulating material, excellent Anti-PID capability
Sand blowing test, salt mist test, and ammonia test passed
Safer with bifacial module and level-A fireproof
12-year product warranty and 25-30 years linear power output warranty
Hot-dip aluminum-zinc and aluminum-zinc-magnesium plate
Hot-dip aluminum-zinc is a pre-plated steel obtained by hot plating a layer of Al-Zn on both sides of a cold rolled steel plate as the base material, with excellent formability, heat resistance, high reflectivity, corrosion resistance, etc.
Aluminum-zinc-magnesium plate adds specific aluminum, magnesium, and other related microelements to the existing hot-dip galvanized or hot-dip aluminum-zinc coating to improve the corrosion resistance and cutting edge for the protection of performance.
Recommended thickness: 0.5mm/0.6mm
Warranty: 25-30 years
Considering the module outdoor hot spotting temperature and the melting point of the back sheet material, the breakage protection temperature is 150±10℃, and the recovery temperature is 90±10℃.
Excellent fastening performance and anti-wind uplift capability
Transverse rib-liked grooves designed for more extensive roof spans, enhancing the strength and rigidity of panels
New patented fixed bearing
Excellent anti-water leak capability, available for mobile factory on-site fabrication
Recommended minimum roof slope of 1°(1/50), ≥550MPa material must be used
The 54 and 72 (monofacial and bifacial) modules have passed TUV certification (IEC 61215, IEC61730)；
According to GB 50205-2020, the module has passed the 5600Pa static wind resistance test, equivalent to a typhoon of grade 17；
Ranking A in the non-combustibility test of fireproof components of building materials；
Impact rupture test passed；
35mm hail impact test passed；
Concentrated load resistance test passed.
1. Ranking A in the non-combustibility test of fireproof components of building materials
2. Over-temperature protection (optional)
1.Concealed clip fixing series
2.One-piece gutter without lap joint in the vertical direction
3.Large drainage capacity
1.Weight Load 12.8Kg/ ㎡
2.Purlin spacing 1.5m, overall snow load 7000 Pa, static wind uplift resistance 5600 Pa, resisting the wind above grade 17
3.Safer with mechanical fastening
4.Hook-locking lock block to prevent disengagement, better performance in pulling force test than aluminum bracket
1.After loosening the fixing nut, it’s convenient to remove the lock block only by "uplifting and sliding."
2.Simplified structure with fewer maintenance parts
3.Overspread module, hassle-free for the automatic cleaning
1.High efficiency: unique lock block design for easy installation, ensuring higher roofing installation efficiency
2.Easy maintenance: simple lock block structure, easily removed with fewer maintenance parts
3.1.5X installation efficiency than conventional BIPV
The cost and benefit of 10,000M²of the roof area of BIPV-BP-ROOF (GCL Bliss Roof)compared with conventional modules.
Cost Item |
GCL Bliss Roof |
Conventional Roof |
|
Initial investment (RMB/W) |
PV modules (average price on 2022/9/20) BOS Color steel tile Installation costs Total |
1.98 0.75 0.47 0.35 3.55 |
1.98 0.80 0.40 0.40 3.58 |
Renovation costs (RMB/W) |
Color steel tile Roof installation PV removal and mounting Power generation loss Total |
/ |
0.48 0.08 0.18 0.07 0.73 |
Total investment (RMB/W) |
3.55 |
4.31 |
|
Cost savings (RMB/W)：0.76 |
|||
For inquiries, please fill out the form below and we will get back to you as soon as possible. We also look forward to welcoming you to our company.
Product Inquiry
Query
组件条码查询
Platform
优惠直销平台